 |
PB24 Rugged cast aluminum power box with 220/115Vac input converting to 24Vac and 96W output power |
 |
PS24 UL-listed indoor power supply, steel enclosure, 120Vac (60 hz) input, 24Vac 8vA output |
 |
PS2496N NEMA 4x rated outdoor plastic enclosure, 110Vac input, 24Vac output: 1 Camera output - 1.1A 1 Heater output - 4A (96vA) |
 |
VS1N VSIN: I channel dual-codec video server with an outdoor NEMA box, 24vac, MPEG-4 & MJPEG video compression format, Full D I |
 |
SPVP110 110vac power surge protection |
 |
SPVO05 Coax Video surge protection (BNC Connector) |
 |
SPVRJ01 Data/Power Over Ethernet Power/Data Surge Protection |
 |
SPVRS04 RS422/485/232, Data surge protection |
 |
IPRS01 IP Reset - Provides a systematic solution for resetting IP cameras or wireless systems. |
 |
EOC1N Videolarm's EOC1N offers a more economical solution when addressing a network system adoption by converting the signal processing speed from analog video (coax) into a high-speed Ethernet mobility. |
 |
EOF2N The EOF2N Converter provides a cost-effective method for integrating fiber optic cabling into a 10/100 UTP environment. |
 |
EOF3C Multi-mode cross-over cable, SC to ST |
|
IPRS01 IP Reset - Provides a systematic solution for resetting IP cameras or wireless systems. |
 |
NP01 Nitrogen fill kit for pressurized housing, includes regulator valve and fill tank; Tank available separately |
 |
KFL24 The KFL24 LED Red Light Kit provides an added visual security to your existing Videolarm RHW or FDW camera housing system. |
WL300-180 White LED Light, 10° - 180° adjustable angle, up to 112ft at 180°. Includes 110/220vac power supply and mounting bracket. Ideal for pole mounted surveillance systems. |
 |
ACH2 24Vac heater/thermostat kit |
 |
CWKFD 24Vac Cold Weather Kit for an additional heater and blower. For Outdoor FusionDomes in extremely cold weather. |
 |
ACH10 Tamper-resistant fasteners and tool for the ACH8 and ACH13 environmental housings |
 |
P10410 Toolhead driver for SuperDome™ models (SDP & SDW) |
 |
PM3T Tension Tool (Used for mounting the APM16 and PM3 brackets) |
 |
PM3K Steel straps and clips (Used for mounting the PM3 bracket) |
 |
AMSWG Replacement Window Guard paint shield (5 pack) - 3 clear and 2 tinted, for AMS90 and AMS180 |
 |
BMTWG Replacement Window Guard paint shield (5 pack) for the BMT10. |
 |
WS5PS 5 Pack of clear or tinted Window Guard paint shields for Warrior 5 |
 |
WS6PS 5 Pack of clear Window Guard paint shields for the Warrior 6 |
 |
PV1 Lightning Rod for Free-standing poles |
 |
VLOPT-IRK Dual IR illuminator bracket for the PolEvator, P1600, or P1800 |
 |
WM1A Adapter plate for WM800 and WM800IR, for use with PolEvator and outdoor aluminum brackets |
 |
ACHY Sunshield for all ACH13 models |
 |
VLAY10 Aluminum sunshield for BMT10 |
 |
VLAY8 Sunshield for AD8/AP8 |
 |
SSY7 Sunshield for RH7 or FusionDome housing |
 |
VLAY16 Sunshield for AD16/AP16 |
 |
VC3/4 23" coiled / 6' extended cable with BNC male/female and two conductor power zoom lens control |
 |
ELTMC Test monitor cable harness (WarriorElite fixed cameras) |
 |
WSTMC Test monitor cable harness (not for use with the Warrior 9) |
 |
VLC485 RS485 controller (2) RS232 ports/ (1) RS485port/joystick control. Desk top model/24vac input power, PAL version available |
 |
WSL25 2.5mm and 8mm lens pack for Warrior housings (not for use with the Warrior 5 or Warrior 6) |
 |
WSLP1216 12mm and 16mm lens pack for Warrior housings (not for use with the Warrior 5 or Warrior 6) |
 |
WSLP68 6mm and 8mm lens pack (Fixed lens - WS1, WS2 and WS8 models only) |
